RM Series | Line Reactors


Due to the attenuation of line disturbances, the life of your solid state devices are extended when protected by the use of a HPS line reactor.  Line reactors, when selected for the output of your drive, will enhance the waveform and virtually eliminate failures due to output circuit faults.  Subsequently, motor operating temperatures are reduced by 10 to 20 degrees and motor noise is reduced due to the removal of some of the high frequency harmonic currents.

  HPS Line Reactors can:

  • Eliminate nuisance tripping
  • Extend the life of switching components
  • Extend the life of your motor
  • Minimize harmonic distortion
  • Short circuit capability
  • Reduce line notching

Key Features

  • Nominal inductance +/- 10% of rated current
  • 95% of nominal inductance @ 150% rated current
  • 50% of nominal inductance @ 350% of rated current
  • 115°C temperature rise on all units; average ambient of 60°C
  • Insulation system: 200°C temperature class up to 160 amps; 220°C temperature class over 160 amps
  • 60 Hz fundamental current maximum
  • 1.2kV maximum system voltage
  • UL listed
  • CSA certified
  • CE Mark
  • 10 year warranty
  • Custom sizes, ratings and styles available upon request