Centurian Series | Energy Efficient Harmonic Mitigating Transformers

Overview

HPS Centurion® Energy Efficient Harmonic Mitigating distribution tranformers are rated for 600 volts and below. Energy efficient harmonic mitigating transformers with zero sequence flux cancellation technology, is specifically designed to treat the harmonics generated by computer equipment and other non-linear, power electronic loads.

Superior to K-rated and conventional transformers in reducing voltage distortion (flat-topping) and power losses due to current harmonics created by single-phase, non-linear loads such as computer equipment. 

HPS provides two lines of energy efficient harmonic mitigating transformers:

HPS Centurion®

The HPS Centurion® energy efficient, harmonic mitigating transformer with zero sequence flux cancellation technology is specifically designed to treat the harmonics generated by computer equipment and other non-linear, power electronic loads.  Combining zero sequence flux cancellation with phase shifting treats 3rd, 5th, 7th, 9th, 15th, 17th and 19th, harmonics within its secondary windings. 

Typical applications of severe non-linear loading conditions include data centers, internet-service providers, telecom sites, call centers, broadcast centers, etc

  • Meets U.S. DOE 10 CFR Part 431 (and/or TP1) efficiency standards and the Canadian Energy Efficiency Regulations SOR/94-651 (and/or C802.2) efficiencies at an operating range from 35% to 65% of rated load.
  • Meets U.S. DOE 10 CFR Part 431 (and/or TP1) efficiency standards and the Canadian Energy Efficiency Regulations SOR/94-651 (and/or C802.2) efficiency standards when measured under a non-linear load profile up to K20 in an operating range from 35% to 50%.
  • 60 Hz frequency
  • Three phase ratings from 15 to 1500 kVA
  • 6 standard three phase voltage groups available
  • Copper & aluminum available
  • UL listed
  • CSA certified
  • 10 year warranty
  • Custom sizes, ratings and styles available upon request

 

HPS SuperCenturion®

  • Exceeds U.S. DOE 10 CFR Part 431 (and/or TP1) efficiency standards and the Canadian Energy Efficiency Regulations SOR/94-651 (and/or C802.2) efficiencies at an operating range from 35% to 65% of rated load.
  • Efficiency performance will be 25% better than U.S. DOE 10 CFR Part 431 (and/or TP1) efficiency standards and the Canadian Energy Efficiency Regulations SOR/94-651 (and/or C802.2) efficiency standards when measured under a linear load profile.
  • Efficiencies will exceed U.S. DOE 10 CFR Part 431 (and/or TP1) efficiency standards and the Canadian Energy Efficiency Regulations SOR/94-651 (and/or C802.2) efficiency standards at an operating range from 35% to 65% of rated load when measured under a non-linear load profile up to K20.
  • 60 Hz frequency
  • Three phase ratings from 15 to 1500 kVA
  • 6 standard three phase voltage groups available
  • Copper & aluminum available
  • UL listed
  • CSA certified
  • 10 year warranty
  • Custom sizes, ratings and styles available upon reques

 

Additional Information